Hrilhfiahna
Battery material siamna iterative process-ah hian he Manual Coin Cell Electrode Disc Cutter hian coated foil atanga functional test cells-a inthlak danglamna tha tak a siam thei a ni. Researcher-te chuan experimental batch hrang hrang atanga electrode siam nan an hmang a, hei hian active material hrang hrang, binder ratio hrang hrang, emaw coating parameter hrang hrangte direct comparison a siamsak a ni. Electrode size leh shape standardize-in key variable pakhat a paih chhuak a, testing neih chhunga performance danglamna hmuhchhuah chu electrode buatsaih danah inmil lohna aiin material composition ngei avanga lo awm a nih thu a tichiang a, chu chuan R&D cycle a ti chak zawk a ni.
1.Technical Parameter hman dan tur
|
Product Hming |
Manual Coin Cell Punching machine hmanga siam a ni |
|
Entawn tlak |
SZO-CPJ-20 a ni |
|
Model tha tak a ni |
AG,CR,LIR Series-a pawisa fai Cell |
|
Dimension a ni |
310(H)×120(W)×220(D)mm a ni |
|
Net Weight a ni |
13Kg a ni |
|
Punching dik tak a ni |
±0.015mm a ni a; (grinding hmanrua chi hrang hrang duh duhin thlak theih a ni) |
|
Punching Thickness a ni |
0.01-0.5mm inkar a ni |
|
Hman dan tur scenario |
College leh university leh corporate experimental line-a hman atan a tha. |
2. Battery model hman tur: AG, CR, leh LIR button cell chi hrang hrang, 2032, 2025, leh 2016 size electrode punching te pawh a tel.
3. Discharge drawer hmanga thuam, punched electrode sheet te chu drawer chhungah direct-in a tla thla a, awlsam taka, all-in-one removal.
4. Punching dikna: ±0.015mm (mould chi hrang hrang inthlak danglam theih a ni).
4. Battery material hrang hrang, thickness 0.01 atanga 0.5mm thlenga punch thei.
6. Punching precision sang tak, burrs, indentations, leh powder hloh te a awm lo.
7 Mold Material: Chrome steel quality sang tak, HRC62 hardness thlenga heat-treated.
8. A zau zawng zawng: 310 (H) × 120 (W) × 220 (D) mm; Glove box application-a hman atan a tha a, a diameter 230 mm aia tam a ni.
9. A rih zawng zawng: Kg 13 vel.
10. Punching plate leh diaphragm mold set khat a awm a, Ø12 leh Ø16 mm (customizable) ve ve a ni.
11. Material hrang hrangah hian stainless steel, 45# Wangpai, leh aluminium alloy te a awm a, electroplating leh oxidation treatment te a awm bawk.
