Hrilhfiahna
He Manual Electrode Punching Machine hi laboratory-scale battery zirchianna atana hmanraw pawimawh tak a ni. Slurry-coated anode emaw cathode foil atanga disc te te chu chiang takin a cut a, chungte chu test coin cells inzawmkhawmna atana electrode pawimawh tak tak an ni. Machine hian heng disc te hian edge thianghlim, burr-free leh diameter inang tlang an neih theih nan a enkawl a, hei hi cell assembly mumal tak leh electrochemical data rintlak tak neih nan a pawimawh hle. Bench-top tool angin battery chemistry thar siamtu materials scientist-te tan chuan a pawimawh hle a, performance evaluation dik tak neih theih nan batch electrode tenau-batch electrode te chu geometry dik tak hmanga prototyping rang taka siam theihna a siamsak a ni.
1.Technical Parameter hman dan tur
|
Product Hming |
Manual Coin Cell Punching machine hmanga siam a ni |
|
Entawn tlak |
SZO-CPJ-20 a ni |
|
Model tha tak a ni |
AG,CR,LIR Series-a pawisa fai Cell |
|
Dimension a ni |
310(H)×120(W)×220(D)mm a ni |
|
Net Weight a ni |
13Kg a ni |
|
Punching dik tak a ni |
±0.015mm a ni a; (grinding hmanrua chi hrang hrang duh duhin thlak theih a ni) |
|
Punching Thickness a ni |
0.01-0.5mm inkar a ni |
|
Hman dan tur scenario |
College leh university leh corporate experimental line-a hman atan a tha. |
2 Battery model hman tur: AG, CR, leh LIR button cell chi hrang hrang, 2032, 2025, leh 2016 size electrode punching te pawh a tel.
3. Discharge drawer hmanga thuam, punched electrode sheet te chu drawer chhungah direct-in a tla thla a, awlsam taka, all-in-one removal.
4. Punching dikna: ±0.015mm (mould chi hrang hrang inthlak danglam theih a ni).
4. Battery material hrang hrang, thickness 0.01 atanga 0.5mm thlenga punch thei.
6. Punching precision sang tak, burrs, indentations, leh powder hloh te a awm lo.
7 Mold Material: Chrome steel quality sang tak, HRC62 hardness thlenga heat-treated.
8. A zau zawng zawng: 310 (H) × 120 (W) × 220 (D) mm; Glove box application-a hman atan a tha a, a diameter 230 mm aia tam a ni.
9. A rih zawng zawng: Kg 13 vel.
10. Punching plate leh diaphragm mold set khat a awm a, Ø12 leh Ø16 mm (customizable) ve ve a ni.
11. Material hrang hrangah hian stainless steel, 45# Wangpai, leh aluminium alloy te a awm a, electroplating leh oxidation treatment te a awm bawk.
